*********************************************

LSI Corp. MegaRAID StorCLI Release 

*********************************************

Release Date: 01/20/14
========================

Supported Controllers
==================

MegaRAID SAS 9361-8i
MegaRAID SAS 9361-4i
MegaRAID SAS 9341-8i
MegaRAID SAS 9341-4i
MegaRAID SAS 9380-8e
MegaRAID SAS 9270-8i 
MegaRAID SAS 9271-4i 
MegaRAID SAS 9271-8i 
MegaRAID SAS 9271-8iCC 
MegaRAID SAS 9286-8e 
MegaRAID SAS 9286CV-8e 
MegaRAID SAS 9286CV-8eCC
MegaRAID SAS 9265-8i
MegaRAID SAS 9285-8e
MegaRAID SAS 9240-4i
MegaRAID SAS 9240-8i
MegaRAID SAS 9260-4i
MegaRAID SAS 9260CV-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260CV-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e
MegaRAID SAS 9280-24i4e
MegaRAID SAS 9280-16i4e
MegaRAID SAS 9260-16i
MegaRAID SAS 9266-4i
MegaRAID SAS 9266-8i
MegaRAID SAS 9285CV-8e


Component:
=========
SAS MegaRAID StorCLI
Release Date: 01/20/14


Version Numbers:	StorCLI
===============		===========			
Current Version		1.07.07
Previous Versoin	1.05.07


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
VMware MN
Solaris x86
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ00493418 - (Closed) - FW breaks to MegaMon on executing "Cli /eall/sall show all" command.
SCGCQ00501866 - (Closed) - Time Left is not show correctly by sparc storcli
SCGCQ00521869 - (Closed) - /call/eall show not providing details of enclosure connected to the second controller
SCGCQ00526799 - (Closed) - Not able to flash PD firmware of 4TB Drive using storcli
SCGCQ00485777 - (Closed) - FW breaks to Megamon, after creating 16 R0 VD's and on executing command "cli /vall show all" from PCLI.
SCGCQ00501376 - (Closed) - "/c0 show dequeuelog file=_____" command is not working in OS OEL_5.9
SCGCQ00503993 - (Closed) - Command "./storcli /call/eall/sall show" fails for second controller with description drive not found.
SCGCQ00505348 - (Closed) - The help file for "/c0 start Diag duration=___" is missing
SCGCQ00503359 - (Closed) - Wrong PCLI version with junk charcters are displayed under GetControllerInfo.
SCGCQ00498965 - (Closed) - "/c0/bbu start learn" command starts battery learn cycle on supercap battery.
SCGCQ00518133 - (Closed) - LSI_MR Controllers fails to set "FACTORY SETTINGS"
SCGCQ00526503 - (Closed) - Flashing of FW in UEFI mode using storcli.efi is issuing File read error.
SCGCQ00501383 - (Closed) - "/c0 show dequeuelog file=_____" command is missing in main help file
SCGCQ00501414 - (Closed) - Online firmware update is not triggered on flashing FW
SCGCQ00524047 - (Closed) - Segmentation fault occures while converting binary to text file of DQlogs
SCGCQ00526385 - (Closed) - Unable to create cachecade VD with WT property .
SCGCQ00522666 - (Closed) - Command "cli /sall show all" 
SCGCQ00524755 - (Closed) - Storcli- Gives incomplete message while clearing config when CC VD is present on the controller
SCGCQ00493544 - (Closed) - "Error! App exec failed in FW PCLIError! Internal" is displayed on executing "Cli /eall/sall spindown" command with 25 drives.
SCGCQ00501437 - (Closed) - StorCLI - MR 6.2 StorCLI help syntax is wrong
SCGCQ00518372 - (Closed) - Displaying the Adapter health status in storcli show.
SCGCQ00501561 - (Closed) - Implemented the diag results to print on console
SCGCQ00484168 - (Closed) - Implemented the AWB for VD creations
SCGCQ00526393 - (Active) - Implementation of "MegaCli adpbbucmd schedulelearn [options.....] an" equivalent command in storcli
SCGCQ00304999 - (Closed) - SWR- Retrieval of controller information fails .
SCGCQ00305001 - (Closed) - storcli command- show DS displays wrong information for type4 and DS off
SCGCQ00307493 - (Closed) - (RW LSIP200233165) Storcli: Reocurance should be spelled as reoccurrence in controller show all properties for PR and CC
SCGCQ00307495 - (Closed) - Displaying the correct operating system for Windows 2012 Server
SCGCQ00308671 - (Closed) - StorCLI is not showing correct driver version in Solaris 11
SCGCQ00309347 - (Closed) - StorCli-SATA Drives "PRODUCT ID" its not showing properly.
SCGCQ00312089 - (Closed) - Storcli- Not able to perform erase operation on a PD on VMWare 4.1 update 2
SCGCQ00312319 - (Closed) - Storcli- Status of /pall set linkspeed is showing success eventhough the operation is failure on ESX 4.1 update 2
SCGCQ00314106 - (Closed) - Remove all negative error codes
SCGCQ00314585 - (Closed) - StorCli - Cache cade VD information page doesn't have any details for associated VDs.
SCGCQ00322316 - (Closed) - Defect: Storcli-Controller show/set help page in that last line execute with Storcli Directory.
SCGCQ00328184 - (Closed) - StorCLI2.0: "endCtlrPropUpdate failed 4" when changing the properties of patrolread
SCGCQ00335239 - (Closed) - Virtual Drive properties(stripe size and size) got changed when VD is degraded
SCGCQ00338301 - (Closed) - StorCLI : Not able to set BBU modes using legacy syntax in EFI Environment
SCGCQ00341488 - (Closed) - stocli_EFI- In paged view the next line after "press enter to continue " should be displayed in next line
SCGCQ00342056 - (Closed) - StorCLI - in command "./storcli show " 2 fields are not getting displayed ( 1. Host Name , 2. Operating System )
SCGCQ00342074 - (Closed) - storcli should not depend on MFC_FEATURES instead check the other bits which indicates whether a particular feature is supported
SCGCQ00342549 - (Closed) - spelling mistake of initialization in (background initialization)
SCGCQ00343721 - (Cloned_EnhReq) - Drive /c0/ex/sx Hot Spare Information, displays array info under Dedicated Drive Group(s) = 0, 1
SCGCQ00343907 - (Closed) - StorCLI_EFI: System halts while performing import preview with securitykey in EFI Environment
SCGCQ00345525 - (Closed) - On performing an "add vd" with size provided in TB a decimal value is truncated to whole number as input.
SCGCQ00349419 - (Closed) - storcli /c0 show all -----> driver version and driver name field is missing
SCGCQ00350744 - (Closed) - ./storcli /c0/dall show -----> In the drive group info the alignment for global hot spare drive is improper.
SCGCQ00352569 - (Closed) - Buffer overflow
SCGCQ00360745 - (Closed) - StorCLI does not provide command to set HSM or HCOE SCGCQ00358662
SCGCQ00362717 - (Closed) - storcli /c0/d0 show " in that legend missing for "Dgrd/pdgd/Onln/ofLn/Rbld"
SCGCQ00363522 - (Closed) - storcli query for displaying controller properties is showing status , as failure.
SCGCQ00364248 - (Closed) - StorCLI failed to delete a VD that is just created under Windows 2008
SCGCQ00364622 - (Closed) - Reports wrong diskgroup size while querying controller level properties
SCGCQ00381100 - (Closed) - MR: not able to create PRL11 using 96 drives.
SCGCQ00462959 - (Closed) - Slow to create VD in HA Linux
SCGCQ00464708 - (Closed) - Storcli display total number of VDs in a individual drive group properties.
SCGCQ00466519 - (Closed) - StorCLI_6.1:The help file for "/c0 compare securitykey h" is missing
SCGCQ00467119 - (Closed) - SWR_SLES_11_SP3_GM Release validation : In storCli " serial number and FW package Build " fields are showing blank
SCGCQ00481532 - (Closed) - Msg comes for all /c0 show commands.
SCGCQ00305002 - (Closed) - Storcli:Unable to update PD Firmware using Storcli in Vmware 5.0
SCGCQ00310308 - (Closed) - Storcli -Format for Date/Time varies in show|show all controller properties .
SCGCQ00313759 - (Closed) - Storcli:Unable to create Cachecade VD in Windows 8
SCGCQ00314602 - (Closed) - StorCli - Cachecade VD information page should not display stripe size.
SCGCQ00316677 - (Closed) - Logical and Physical sector size must be hidden when 512E feature is not supported
SCGCQ00322262 - (Closed) - iMR_Inv:37 drives shown as unconfigured good in MegaCLI when "enable JBOD=0" in Ubuntu 12.04 32 bit OS
SCGCQ00324797 - (Closed) - Serial Number of controller is not displayed for some controllers.
SCGCQ00332212 - (Closed) - libsysfs custom implementation issue.
SCGCQ00341418 - (Closed) - In the command O/P of <./storcli /c0 show all>"Driver Name" and "Driver Version"are NOT matching with actual name and version
SCGCQ00342723 - (Closed) - It is displaying the driver version as driver name
SCGCQ00344992 - (Closed) - In the command O/P of <./storcli /c0 show all>, ErrMsg 255 Failed to get Bus Info is displayed
SCGCQ00348911 - (Closed) - Adapter 0: Failed to start SecureErase on Virtual Drive 0 in VMware_ESXi_5.1
SCGCQ00353679 - (Closed) - StorCli-"/c0/eall/sall show"in that need to be describe the GHS/Onln/Offln/F
SCGCQ00355536 - (Closed) - MegaCli and StorCli can not manage both Liberator (and prior) and TB controllers in the same system under FreeBSD with the mfi adn mrsas driver.
SCGCQ00357653 - (Closed) - Removing static memory allocation and allocating memory dynamically in function stricmp in file Cutils.cpp
SCGCQ00357913 - (Closed) - Update VD emulation feature in StorCLI Libmods module to sync with latest APIs.
SCGCQ00359998 - (Closed) - Code clean up in libmods and sysefi files are added
SCGCQ00360814 - (Closed) - StorCLI: Not able to set pr property includessds as onlymixed on Liberator cacheoffload controller
SCGCQ00362421 - (Closed) - StorCLI: Not able to detect Liberator Controller on FreeBSD 9.0(64-bit)
SCGCQ00364097 - (Closed) - iMR_Inv_6.1:StoreCLI- StoreCLI reports wrong Emulation type for VDs
SCGCQ00366000 - (Closed) - Storcli displays incomplete serial number for some SSDs
SCGCQ00374979 - (Closed) - Storcli ld info command displays R10 vd Span Depth to 1.
SCGCQ00469162 - (Closed) - In virtual drives information the Cac filed values are incorrect with regular VD's
SCGCQ00476030 - (Closed) - while running I/O ,It's taking time to load the controller information.
SCGCQ00312928 - (Closed) - Storcli- Abbreviation of UID should be mentioned in the output for /cx/fall show all
SCGCQ00314122 - (Closed) - Missing characters in PD model display
SCGCQ00317649 - (Closed) - Defect: StorCli-VD state "Dgrd'' is changed in the description-''dgrd''
SCGCQ00326862 - (Closed) - FreeBSD support for MegaWare Cli
SCGCQ00338688 - (Closed) - Storcli spelling mistakes and typos
SCGCQ00343593 - (Closed) - Description for different Drive "State" like DHS, Ugood, Online need to be provided under Show Drive Information
SCGCQ00363455 - (Closed) - The legend for the PD List table exceeds 80 char limit.
SCGCQ00364735 - (Closed) - UEFI, the O/P of <storcli /c0 show all>"Current Controller Date/Time" & "Current System Date/time" are not in proper format
SCGCQ00371445 - (Closed) - Vmware CLI fails to set the phy linkspeed
SCGCQ00377364 - (Closed) - StorCli shows Power Saving Option as enabled, despite controller having power saving option completely disabled.
SCGCQ00383043 - (Closed) - StorCLI-Invader : The "coercion" mode is not in sync with the legacy values.
SCGCQ00394883 - (Closed) - StorCli_MR: While Creating RAID1 with four drives command facing the "C0:BAIL_OUT at line 1354"
SCGCQ00396303 - (Resolved) - Cfgclr command fails without force option in Sparc OS
SCGCQ00460861 - (Closed) - MR_Inv_6.1:StorCLI- Gives wrong message after battery retention test command is issued for Supercap FBU03
SCGCQ00462885 - (Closed) - Need to remove storcli /cx show clusterenable and storcli /cx set clusterenable=<value> since FW did not support this in HA
SCGCQ00466038 - (Closed) - MR_Inv_6.1:StoreCLI- StorCLI reports retention time as 0 for supercap FBU02 and FBU03
SCGCQ00466251 - (Closed) - HA : StorCLI crash when update drive firmware
SCGCQ00471042 - (Closed) - PCLI:Cant able to set securitykey for Controller and also VD name for VD(Takes as uppercharacter even if name given in lower)
SCGCQ00485270 - (Closed) - StorCLI- unsupported CV operations for SuperCap 'set' needs to be removed
SCGCQ00311990 - (Closed) - Removed unsupported property "Ra=Read Ahead Adaptive" from VD information.
SCGCQ00314114 - (Closed) - sector size of PDs are shown as 512 KB which is wrong.
SCGCQ00314128 - (Closed) - Add abbreviation description to all the PD states
SCGCQ00318435 - (Cloned_EnhReq) - Porting of 1.0 PRs to storcli phase 2.5 (Libmods)
SCGCQ00345372 - (Closed) - Storcli command "/cx show all" must display ROC temperature.
SCGCQ00359629 - (Closed) - In paged view the text " Press Enter to continue" should be changed to " Press any key to Continue"
SCGCQ00365950 - (Closed) - StorCLI cannot displays information for controller in Safe mode
SCGCQ00442610 - (Closed) - Onfi_patch_6.0:Firmware crashed @Line 244 in ../../raid/1078int.c for entering into CTRL-R with Pinned cache in R60 and R6.
SCGCQ00469179 - (Closed) - Aligning with FW for strip calculation for 4K drives
SCGCQ00337962 - (Closed) - StorCLI: not able to save events in txt file in EFI environment
SCGCQ00362216 - (Closed) - iMr_Fury_StorCli:4K Drive size shown wrong in Esxi4.1U3
SCGCQ00365632 - (Closed) - PCI Info for FreeBSD needs to be indicated as "N/A"
SCGCQ00379104 - (Closed) - Not able to get paged view of StorCLI output on VM-Ware Platform
SCGCQ00438350 - (Closed) - Megacli crashes after invoking any command in SGI system with one 9280-8e and 2 quad port qlogic FC cards.
SCGCQ00485561 - (Closed) - storclio set and get vpd gives a wrong output in failure case.
SCGCQ00493690 - (Closed) - /var/tmp//installobaWVe/checkinstallrbaWVe: line 11: syntax error at line 22
SCGCQ00481039 - (Closed) - option -v doesn't work with preboot storcli
SCGCQ00311436 - (Closed) - Storcli-SWR- Controller serial number display is different in show/showall controller properties .
SCGCQ00360040 - (Closed) - Storcli is returning error with show
SCGCQ00408070 - (Closed) - StorCLI does not show both "Current Write Policy" and "Default Write Policy" for VD
SCGCQ00423832 - (Closed) - EFI_ Storcli: Cannot set vpd file on controller, EFI hangs and cannot proceed for further operations until reboot
SCGCQ00470976 - (Closed) - Storcli shows irrelevant information about Nytro cache VD when user types "CfgCacheCadeDsply"
SCGCQ00484372 - (Closed) - Storcli:Help file modification required for command ''/cx set eghs''
SCGCQ00357263 - (Closed) - MegaCLI adpgetpciinfo returns a static Bus Number value "17d0"
SCGCQ00362070 - (Closed) - iMr_Fury_StorCLi:SectorSize show as "512KB" for 512Bytes drives
SCGCQ00396665 - (Closed) - StorcLi_5.7: Remove the description for "Ra=Read Ahead Adaptive" in VD show info.
SCGCQ00397663 - (Closed) - StorCli_MR: While creating VD using default values FW allows read policy as"Ra=Read Ahead Adaptive" as against PR-317400
SCGCQ00424978 - (Closed) - Is VD Emulated=Yes when emulationType=1
SCGCQ00436107 - (Closed) - The bootwithpinnedcache logic is backwards, both storcli and the FW are affected
SCGCQ00448094 - (Closed) - core dump while issuing storcli command ./storcli /c0/fall show all.
SCGCQ00454971 - (Closed) - storcli /c0 show is not listinf SWR controller
SCGCQ00471978 - (Closed) - Storcli does not show firmware version using Megacli syntax
SCGCQ00472000 - (Closed) - Storcli:"storcli /c0/v0 del help" does not show information on normal vd delete
SCGCQ00314119 - (Closed) - "Drive NCQ setting" field Removed
SCGCQ00357948 - (Closed) - StorCLI does not display drive information behind the Blackjack (Alta) interposer correctly
SCGCQ00384644 - (Closed) - iMR_Inv_6.1:StorCLI- StorCLI does not show 'Unsupported/Blocked' state for 4K drives even though FW is not supporting 4K
SCGCQ00413789 - (Closed) - storcli crashes on having a non PI drive and trying to create pi vd on all the drive
SCGCQ00442652 - (Closed) - SWR_1.34 - Serial number field is blank in controller information and the same could be updated with N/A in StorCli
SCGCQ00484230 - (Closed) - "Cli /ex/sx set offline" fails with errcd -1 and message enclosure ID not found.
SCGCQ00495121 - (Closed) - Unable to set pnpid using the ini file with captal letters mixed in the string
SCGCQ00330250 - (Closed) - StorCLI compliance with OSSRB recommendation
SCGCQ00342399 - (Implemented) - CSET: (Tbolt PR 211180) Punctured Block Logging Improvements
SCGCQ00329470 - (Closed) - Implemented the StorCLI commands to erase contents from NVCache
SCGCQ00488282 - (Implemented) - Add ability to change/program PCIDATA in StorClio (CLI for OEMs)
SCGCQ00501189 - (Implemented) - MWCLI. Add command /cX/vX locate
SCGCQ00323426 - (Implemented) - Porting of Vogel 1.0 PRs to storcli phase 2.5 [Libmods]
SCGCQ00349599 - (Implemented) - Refer attached design doc
SCGCQ00352120 - (Implemented) - MWCLI. Add HA support into storcli
SCGCQ00329469 - (Closed) - Implemented the StorCLI commands to scrub memory on controllers
SCGCQ00332606 - (Implemented) - Display Drive Model number, Serial Number and Firmware Revision as in MSM
SCGCQ00349548 - (Closed) - Uneven span support is added in StorCLI.
SCGCQ00351234 - (Implemented) - Provide a way to enable or disable 512E using Applications
SCGCQ00479543 - (Implemented) - MWCLI: Need MegaOEM for Solaris x86 and Solaris SPARC
SCGCQ00333213 - (Closed) - Implemented 128 drive support by using the new ENCL_INFO structures
SCGCQ00322837 - (Closed) - Printing multiple json objects from different controllers as a single Array
SCGCQ00332600 - (Implemented) - StorCLI compliance with OSSRB recommendation
SCGCQ00350668 - (Implemented) - Create Spanned R0 array (00) in StorCLI
SCGCQ00381311 - (Implemented) - dcmd path chagnes for supporting the new cachevault api
SCGCQ00369742 - (Implemented) - MWCLI. R10, R50, R60, R00 VD creation
SCGCQ00381093 - (Implemented) - PR SCGCQ00319011: Rebuild time reset
SCGCQ00433703 - (Implemented) - Megacli/storcli support for lmrc driver
SCGCQ00413856 - (Port_Complete) - remove the "Drive write cache" policy from Pd information.
SCGCQ00469192 - (Port_Complete) - Aligning with FW for strip calculation for 4K drives
SCGCQ00471590 - (Port_Complete) - Need to remove storcli /cx show clusterenable and storcli /cx set clusterenable=<value> since FW did not support this in HA
SCGCQ00504584 - (Port_Complete) - Command "./storcli /call/eall/sall show" fails for second controller with description drive not found.
SCGCQ00413017 - (Port_Complete) - Storcli reports "segmentation fault" when running command to downgrade controller to iMR
SCGCQ00376240 - (Port_Complete) - System halts on issuing storcli commands in EFI Environment.
SCGCQ00437065 - (Port_Complete) - Driver Version is not shown
SCGCQ00473065 - (Port_Complete) - StorCli_6.1: The SATA drive is dropped while creating a R1 vd using mix of SAS and SATA drives
SCGCQ00478786 - (Port_Complete) - (v 1.04.11) get a good return code (0) even when it failed
SCGCQ00471582 - (Port_Complete) - Storclio:Spelling mistake during execution of command 'compare factorysettings'
SCGCQ00475598 - (Port_Complete) - Storcli:4K -Wrong size updated after performing OCE on 4K Drives .
SCGCQ00475601 - (Port_Complete) - storcli crash while using the command /cx/vx expand size=xx expandarray
SCGCQ00414383 - (Port_Complete) - When a command fails, subsequent commands/actions are aborted in storcli (MegaCli)
SCGCQ00481849 - (Port_Complete) - StorCLI- StorCLI reports wrong capacitance value for supercap FBU03
SCGCQ00412593 - (Port_Complete) - Resolving compiler errors for Ctrl-R
SCGCQ00471048 - (Active) - HA : StorCLI crash when update drive firmware
SCGCQ00469390 - (Port_Complete) - MR_Inv_6.1:StoreCLI- StorCLI reports retention time as 0 for supercap FBU02 and FBU03


Installation Commands: 
=======================
Any OS specific instructions are noted in a readme.txt file in the zip file.
Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI usage instructions.


=======================
Previous Releases
=======================


Component:
=========
SAS MegaRAID StorCLI
Release Date: 09/23/13


Version Numbers:	StorCLI
===============		===========			
Current Version		1.05.07
Previous Versoin	1.04.07


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
VMware MN
Solaris x86
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ00009501 - (Closed) - MPI2_FW_IMAGE_HEADER is 16 bits too long
SCGCQ00183867 - (Closed) - MPI2: IO Unit Page 10 structure incorrect
SCGCQ00364332 - (Closed) - iMR_Inv_6.1:StoreCLI-StoreCLI does not give proper message while trying to create 33rd VD on iMR FURY controller
SCGCQ00374336 - (Closed) - System halts on issuing storcli commands in EFI Environment.
SCGCQ00374732 - (Closed) - StorCLI cannot set "bypasserror" or "be"
SCGCQ00374733 - (Closed) - Storcli does not show 512 strip size in the online help
SCGCQ00378124 - (Closed) - Porting of AdpRestart Command
SCGCQ00379046 - (Closed) - MegaCLI help shows Storcli in generic help command
SCGCQ00379112 - (Closed) - storcli-legacy: The helpfile for "adpfwflash" needs to be updated for "NoVerChk"
SCGCQ00381383 - (Closed) - Storcli_Invader: "/c0 pause pr" Description message should be sync with command
SCGCQ00394588 - (Closed) - storcli only displays 1 vd when 7 present on DG view
SCGCQ00397280 - (Closed) - StorCli_MR:Need to modify the "DIMMER SWITCH" Help Description
SCGCQ00397877 - (Closed) - SWR: EFI:"Press any key to continue" displays twice.
SCGCQ00397893 - (Resolved) - SWR: EFI: Operating system details shows nothing.
SCGCQ00399897 - (Closed) - BBU GasGauge Status information should not get printed for TMMC
SCGCQ00400429 - (Closed) - Storcli help lists unsupported /Fx option for foreign commands
SCGCQ00406358 - (Closed) - CLI does not provide appropriate error message and error code when secure erase is not supported
SCGCQ00414300 - (Closed) - StorCli_6.0-The help file for "storcli /cx/fx " is missing.
SCGCQ00415814 - (Closed) - storcli only associates 38 out of 48 VDs
SCGCQ00418295 - (Closed) - size=0 VD is getting created with remaining free space, when a VD is present in Drive Group.
SCGCQ00421114 - (Closed) - Storcli/Storclif/storclio:Help file for Legacy commands displays mrcli instead storcli.
SCGCQ00421282 - (Closed) - StorCLIO : not able to get or set hwdevice information with storCLIO
SCGCQ00423757 - (Closed) - EFI: Storcli : Not able to get and set vpd information on TMM module or Supercap
SCGCQ00435852 - (Closed) - misspelled word in storcli.efi message
SCGCQ00437754 - (Closed) - Help syntax is not aligned with 80 char per line limits.
SCGCQ00449926 - (Closed) - Power Shell support for megacli syntax for windows _ Porting
SCGCQ00450496 - (Closed) - StorcliF : output for the command /c0 compare factorysettings is not in sync with the legacy output.
SCGCQ00456135 - (Closed) - Unable to create Cachecade VD by referring the syntax in Help file for ''add vd'' .
SCGCQ00462959 - (Closed) - Slow to create VD in HA Linux
SCGCQ00466519 - (Closed) - StorCLI_6.1:The help file for "/c0 compare securitykey h" is missing
SCGCQ00372155 - (Closed) - Certain controller features displayed under "show all" exceeds 80-char limit.
SCGCQ00374118 - (Closed) - StorCli-"/c0/dall show all "in FreeSpaceDetails legend missing for "ID/VD/AfterVD"
SCGCQ00374979 - (Closed) - Storcli ld info command displays R10 vd Span Depth to 1.
SCGCQ00376643 - (Closed) - Fail to set/disable the Disk Cache Policy along with the vd creation.
SCGCQ00378135 - (Closed) - portings of AdpRestart command
SCGCQ00378828 - (Closed) - StorCLI-Legacy:'adpbootdrive get' fails to get bootdrive information.
SCGCQ00385101 - (Closed) - StorCli implementation of AdpRestart Command
SCGCQ00386429 - (Closed) - StorCLI help file shows /cx/dx show cachecade instead of /cx/dall show cachecade
SCGCQ00391731 - (Closed) - storcli displays message as firmware flash successfully completed even the flashing is failed.
SCGCQ00397014 - (Closed) - With one VD as foreign, StorCLI shows all VDs as foreign.
SCGCQ00397269 - (Closed) - StorCli_5.7: On SuperCap battery ''strat learn" operation is not allowed
SCGCQ00399002 - (Closed) - handleTokens(tokenListPtr);
SCGCQ00399387 - (Closed) - Not able to find range for Perf Mode value
SCGCQ00401663 - (Closed) - help text not working for the command set securitykey
SCGCQ00412827 - (Closed) - CV (CacheVault) does not support changing bbu mode but StorCLI show option to change bbu mode
SCGCQ00417435 - (Closed) - StorCLIF : the command /cx get hwdevice fails to get VPD information.
SCGCQ00417973 - (Closed) - Storclio/Storclif-Detailed help for the command start diag required .
SCGCQ00423781 - (Closed) - StorCLIF : getting wrong values for get gas gauge information.
SCGCQ00441696 - (Closed) - StoreCLI- Inconsistent behavior across different application when creating cachecade VD
SCGCQ00466251 - (Closed) - HA : StorCLI crash when update drive firmware
SCGCQ00467119 - (Resolved) - SWR_SLES_11_SP3_GM Release validation : In storCli " serial number and FW package Build " fields are showing blank
SCGCQ00469179 - (Closed) - Aligning with FW for strip calculation for 4K drives
SCGCQ00372264 - (Closed) - StorCLI: The legend for "phy Error Counters" exceeds the 80-char limit.
SCGCQ00374377 - (Closed) - GetGGEEPData equivalent syntax is not present in storcli
SCGCQ00374418 - (Closed) - Storcli : controller information query is displaying the status as failure.
SCGCQ00375757 - (Closed) - "StorCLI /cx/bbu show modes" show the bbu modes description without the actual bbu mode number
SCGCQ00377364 - (Closed) - StorCli shows Power Saving Option as enabled, despite controller having power saving option completely disabled.
SCGCQ00380889 - (Closed) - Not able to set securitykey on controller
SCGCQ00381100 - (Resolved) - MR: not able to create PRL11 using 96 drives.
SCGCQ00383043 - (Closed) - StorCLI-Invader : The "coercion" mode is not in sync with the legacy values.
SCGCQ00384644 - (Resolved) - iMR_Inv_6.1:StorCLI- StorCLI does not show 'Unsupported/Blocked' state for 4K drives even though FW is not supporting 4K
SCGCQ00386586 - (Closed) - include support for SWR controllers in non LSI verison of storcli.
SCGCQ00394127 - (Closed) - Added the command to DOS SCU
SCGCQ00394883 - (Closed) - StorCli_MR: While Creating RAID1 with four drives command facing the "C0:BAIL_OUT at line 1354"
SCGCQ00396303 - (Resolved) - Cfgclr command fails without force option in Sparc OS
SCGCQ00400019 - (Closed) - "storcli /c0/dall show" command not working
SCGCQ00411501 - (Closed) - StorCli_MR: Cache vault Strart learn command displaying twice in the hep file "/c0/cv h"
SCGCQ00414328 - (Closed) - Perf mode value not getting set when executed along with the other parameters
SCGCQ00414731 - (Closed) - Checking in StorcliF & storcli0 changes
SCGCQ00415454 - (Closed) - StorCLI help file does not display "add vd spanned array"
SCGCQ00420040 - (Closed) - StorCLIF : Not able to read or write factory settings with adpsettings command (legacy command )
SCGCQ00436928 - (Closed) - Illusive/Bad Data Extracted
SCGCQ00437762 - (Closed) - Exit code coming as 1 for adpbios (Megacli Syntax)
SCGCQ00443072 - (Closed) - SWR: In Store Cli if we start any background operation Estimated time left field showing Blank
SCGCQ00447686 - (Closed) - Storecli does not display complete information for the command ./storecli /c0/p0-x show.
SCGCQ00456501 - (Closed) - StorcliF: StorcliF and StorcliO crashes when given invalid file for the command /c0 set factorysettings file=filename
SCGCQ00460861 - (Closed) - MR_Inv_6.1:StorCLI- Gives wrong message after battery retention test command is issued for Supercap FBU03
SCGCQ00466038 - (Closed) - MR_Inv_6.1:StoreCLI- StorCLI reports retention time as 0 for supercap FBU02 and FBU03
SCGCQ00469162 - (Closed) - In virtual drives information the Cac filed values are incorrect with regular VD's
SCGCQ00379157 - (Closed) - StorCLI: the help file for "storcli /cx transform iMR" is missing
SCGCQ00380143 - (Closed) - The set phy linkspeed operation needs to have the unit(GB/s) mentioned and the Description" column is blank for set and Show.
SCGCQ00394952 - (Closed) - Segmentation fault hitting while executing the command "/c0 set bgi h "
SCGCQ00398246 - (Closed) - VD create syntax display improper output.
SCGCQ00398992 - (Closed) - Command displayed in the same line after "Press any key to continue".
SCGCQ00402499 - (Closed) - Storecli /c0 show eventloginfo 
SCGCQ00403335 - (Closed) - Mismatch of "Start Copyback " command in global help file and particular help file of copyback .
SCGCQ00436538 - (Closed) - pd version is not listing all if PDs are missing
SCGCQ00442610 - (Closed) - Onfi_patch_6.0:Firmware crashed @Line 244 in ../../raid/1078int.c for entering into CTRL-R with Pinned cache in R60 and R6.
SCGCQ00447972 - (Closed) - Storcli : adpgetprop command for enableeug/enableeghsp showing success and not getting reflected when we give wrong flag
SCGCQ00451393 - (Closed) - Megascu adpm0flash command hangs for Dell controllers.
SCGCQ00462885 - (Closed) - Need to remove storcli /cx show clusterenable and storcli /cx set clusterenable=<value> since FW did not support this in HA
SCGCQ00364097 - (Resolved) - iMR_Inv_6.1:StoreCLI- StoreCLI reports wrong Emulation type for VDs
SCGCQ00375625 - (Closed) - StorCLI : Displaying failure in the output for querying Dimmer switch information
SCGCQ00379104 - (Closed) - Not able to get paged view of StorCLI output on VM-Ware Platform
SCGCQ00390777 - (Closed) - iMR_Inv_6.1:StorCLI- VD creation command does not give any message if we tried to create a PI VD using normal PDs
SCGCQ00392598 - (Closed) - Pause operation should be sync with in show status of the PR.
SCGCQ00392686 - (Closed) - For the perfmode command in the help file we are displaying the storcli.exe /cx set perfmode = <value> syntax
SCGCQ00393442 - (Closed) - Spelling mistake in keyword headlessSafeMode
SCGCQ00406580 - (Closed) - Adprestart command fails
SCGCQ00413803 - (Closed) - Factory Command /c0/bbu start retentiontest should not be supported in storcli
SCGCQ00438350 - (Closed) - Megacli crashes after invoking any command in system with one 9280-8e and 2 quad port qlogic FC cards.
SCGCQ00457906 - (Closed) - storcli_6.1:The help file for"./storcli /cx/mx set h " is missing
SCGCQ00374735 - (Closed) - StorCLI crashed when run on a Windows 2008 64-bit with 24GB of RAM and 66 drives attached
SCGCQ00380746 - (Closed) - Error handling for Drive FW download when the hardware is not supported.
SCGCQ00384729 - (Closed) - Storcli-Inv-multiple VD's in same DG, setting security using /cx/vall set security=on is Failing for every VD except 1st VD
SCGCQ00392501 - (Closed) - StorCli_5.7 : "/c0/bbu start learn h " is not showing.
SCGCQ00394005 - (Closed) - Enabling OCR from StorCLI actually disables the controller property.
SCGCQ00394375 - (Closed) - Adprestart command fails
SCGCQ00397920 - (Closed) - StorCli_MR: BBU Strart learn command displaying twice in the "/c0/bbu h"
SCGCQ00400025 - (Closed) - Storcli shows inaccurate Elapsed Time as recon progresses
SCGCQ00400640 - (Closed) - Copyright information is showing wrongly
SCGCQ00408070 - (Closed) - StorCLI does not show both "Current Write Policy" and "Default Write Policy" for VD
SCGCQ00423347 - (Closed) - Storclif :Segmentation Fault with execution of legacy command BBUMFGSET .
SCGCQ00423832 - (Closed) - EFI_ Storcli: Cannot set vpd file on controller, EFI hangs and cannot proceed for further operations until reboot
SCGCQ00433513 - (Closed) - StorcliF : Not able to get or set connector mode on cassiopeia controller
SCGCQ00436931 - (Closed) - CLI displays VPD data for TMM and Battery/Supercap = ONLY TMM Data Extracted but NOT Supercap Data
SCGCQ00449134 - (Closed) - Battery Over-temp is not showing correctly.
SCGCQ00454427 - (Closed) - Storcli_6.1:"press any key to continue" showing twice in the lagacy command
SCGCQ00464708 - (Closed) - Storcli display total number of VDs in a individual drive group properties.
SCGCQ00369258 - (Closed) - Description is shown as "None" when using verchk option while flashing fw.
SCGCQ00392053 - (Closed) - MegaCLI and StorCLI should display "Estimated Time Left" in hours, days and minutes format.
SCGCQ00396665 - (Closed) - StorcLi_5.7: Remove the description for "Ra=Read Ahead Adaptive" in VD show info.
SCGCQ00397663 - (Closed) - StorCli_MR: While creating VD using default values FW allows read policy as"Ra=Read Ahead Adaptive" as against PR-317400
SCGCQ00399443 - (Closed) - StorCLI App Crash while execution of event info for vd ccincon
SCGCQ00402910 - (Closed) - StorCli_6.0:Raid level can be created even wthout delimiter(i.e size=1gb1gb1gb1gb)
SCGCQ00424978 - (Closed) - Is VD Emulated=Yes when emulationType=1
SCGCQ00436107 - (Closed) - The bootwithpinnedcache logic is backwards, both storcli and the FW are affected
SCGCQ00448094 - (Closed) - core dump while issuing storcli command ./storcli /c0/fall show all.
SCGCQ00454971 - (Closed) - storcli /c0 show is not listinf SWR controller
SCGCQ00378448 - (Closed) - StorCLI reports incorrect message when download a firmware image to the controller with pinned cache
SCGCQ00395178 - (Closed) - storcli doesnt support legacy MegaCli elf commands
SCGCQ00400139 - (Closed) - StorCLI shows date of manufacture in non-convention format
SCGCQ00413789 - (Closed) - storcli crashes on having a non PI drive and trying to create pi vd on all the drive
SCGCQ00422006 - (Closed) - Storcli crashes when given wrong in put file to set VPD on controller
SCGCQ00442444 - (Closed) - MR_Inv_6.1:StoreCLI- StorCLI gives wrong info when preserved cache is generated on 4K VD (./storcli /c0 show preservedcache).
SCGCQ00442652 - (Closed) - SWR_1.34 - Serial number field is blank in controller information and the same could be updated with N/A in StorCli
SCGCQ00066241 - (Closed) - MPI 2.5: Power Management
SCGCQ00308453 - (Closed) - MPI2: IR reporting Elapsed Seconds
SCGCQ00299943 - (Closed) - MPI2: add IOCExceptions bit for Partial Memory Failure
SCGCQ00250721 - (Closed) - MPI2: Update Hard Reset Algorithm with new timings
SCGCQ00209048 - (Closed) - MPI2: Return Port info in the SAS Device Status Change Event
SCGCQ00201727 - (Closed) - MPI2: Add spin-up disable bit to SAS IO Unit Page 4
SCGCQ00201203 - (Closed) - MPI2: Remove/Obsolete MPI Power Management Control Feature PCIE_LINK
SCGCQ00194293 - (Closed) - MPI2: product specific range for extended image type
SCGCQ00116336 - (Closed) - Gen 3: method to enable/disable FastPath capability on a per-device basis
SCGCQ00125672 - (Closed) - Gen 3: add 12Gb/s option for link rate
SCGCQ00125683 - (Closed) - MPI2: add Link Rate of UNSUPPORTED_PHY_ATTACHED
SCGCQ00136677 - (Closed) - Gen3: add optional vendor-unique region to MPI25_SCSI_IO_REQUEST structure
SCGCQ00137514 - (Closed) - MPI2: add PCI Device ID for Warhawk
SCGCQ00138259 - (Closed) - MPI2: add alternative defines for SGE Direction bit
SCGCQ00140397 - (Closed) - MPI2: modify Host Based Discovery Action Request
SCGCQ00141834 - (Closed) - MPI2: ability to disable SATA NCQ on a per-device basis
SCGCQ00155192 - (Closed) - MPI 2.5: update PCI Device Ids for Invader / Fury
SCGCQ00157968 - (Closed) - MPI2: Add new Config Page Type - Extended Manufacturing
SCGCQ00159010 - (Closed) - MPI2: MFG 7 update: method to link ISTWI devices, GPIO, PHYs of a SAS connector
SCGCQ00160485 - (Closed) - MPI2: Change MPI Simple SGE Local bit description and IEEE Chain Flags to match HW
SCGCQ00161661 - (Closed) - MPI2: Add IOC Temperature Monitoring Capability
SCGCQ00162562 - (Closed) - MPI2: rework Pinout field of ConnectorInfo for MFG Page 7
SCGCQ00162597 - (Closed) - MPI2: reserve some FWDownload ImageType values for product-specific use
SCGCQ00163413 - (Closed) - MPI2: IOUnit page 7: Add new fields for Board temperature
SCGCQ00163641 - (Closed) - MPI 2.5: SCSI Initiator I/O path counters (SAS IO Unit Page 16)
SCGCQ00164407 - (Closed) - MPI 2.5: review SGE Flags for Local bit and Data Location Address Space changes
SCGCQ00166171 - (Closed) - MPI2: new event for NOTIFY(Enable Spinup)
SCGCQ00176893 - (Closed) - MPI 2.5: new Power Performance Change Event to report changes to global power management mode
SCGCQ00177635 - (Closed) - MPI 2.5: report offset of first EEDP error in SCSI IO Reply
SCGCQ00268818 - (Closed) - Allow for MPI 2.5 IEEE Chain Element in SATA Passthrough Request
SCGCQ00283196 - (Closed) - Toolbox Diagnostic CLI Request now uses IEEE SGL, including chain elements
SCGCQ00378774 - (Implemented) - new storcli object is added to storcli to represent cachevault
SCGCQ00413314 - (Implemented) - Implement storclif commands - get/set hwdevice and configpage
SCGCQ00413317 - (Implemented) - Implementation of StorCLIF command for AdpSetSubOEMId XX -aN and AdpGetSubOEMId -aN
SCGCQ00421090 - (Closed) - Added the HA code to MR5.8 stream
SCGCQ00425077 - (Implemented) - Set factory default command in StorCLI
SCGCQ00283198 - (Closed) - MPI2: Toolbox Diagnostic CLI Tool Request may now use chain elements in the SGL
SCGCQ00258327 - (Closed) - MPI2: Reserve Product Specific range for Event codes
SCGCQ00229719 - (Closed) - MPI2: BIOS Page 1 additions for UEFI HII
SCGCQ00228572 - (Closed) - MPI2: add 4K sectors supported bit to IOC Page 6 CapabilitiesFlags field
SCGCQ00203886 - (Closed) - MPI2: New RAID Action (COMPATIBILITY_CHECK)
SCGCQ00194461 - (Closed) - MPI2: Add auto reserve and 8-kbit seeprom support to ISTWII
SCGCQ00128142 - (Closed) - Gen 3: update MPI v2.5 header files
SCGCQ00132183 - (Closed) - MPI2: add optional vendor-unique region to MPI2_SCSI_IO_REQUEST structure
SCGCQ00136201 - (Closed) - MPI2 - additional IR status information
SCGCQ00142578 - (Closed) - MPI2: obsolete MPI2_IOUNITPAGE1_MULTI_PATHING
SCGCQ00169936 - (Closed) - MPI 2.5: remove Command Determines Data Direction bit from SCSI IO
SCGCQ00172984 - (Closed) - MPI2: for SRIOV, allow PF to access config pages for other VFs
SCGCQ00175997 - (Closed) - MPI2: Add IO Unit Page 10 - Host Credit Balancing
SCGCQ00218764 - (Closed) - MPI2: new name for SCSI IO Request Control bits
SCGCQ00227491 - (Closed) - MPI 2.5: IR - new Raid Action to enable the Fast Path
SCGCQ00209055 - (Closed) - MPI2: create product-specific range for RAID Action Request
SCGCQ00125496 - (Closed) - Gen 3: remove Release On Full option for diag trace buffer
SCGCQ00159395 - (Closed) - MPI 2.5: Obsolete MPI2_RAID_VOL_CREATION_BACKGROUND_INIT
SCGCQ00175743 - (Closed) - MPI2: method to communicate between hosts on virtual functions
SCGCQ00433477 - (Implemented) - Mapping of MegaCLI(DPMenable(set/get) & ForceSGPIO(get/set) command to StorCLI( (show/set -> DPM) & (show/set SGPIOforce))
SCGCQ00438735 - (Closed) - Changed the storcli syntaxes as Suggested by PDM's and FAE's.
SCGCQ00157982 - (Closed) - MPI 2.5: Chain SGL Segment sizes
SCGCQ00399602 - (Implemented) - storcli support for LSI and OEM, factory
SCGCQ00412981 - (Implemented) - implementation of StorcliF commands for adpsetsasa,adpdiag,adpshutdown
SCGCQ00435665 - (Implemented) - storcli mapping for the missing legacy commands
SCGCQ00125662 - (Closed) - MPI2: review Task Set Full handling
SCGCQ00353002 - (Implemented) - Signed FW Update
SCGCQ00375811 - (Closed) - Need MegaSCU for changes in MFC
SCGCQ00380155 - (Implemented) - Undo - blocking firmware update for drives behind ALTA
SCGCQ00413337 - (Implemented) - MWCLI. storcli builds for LSI and OEM factory, please check description.
SCGCQ00137489 - (Closed) - MPI2: bring Diagnostic Data Upload Tool forward from MPI v1.5
SCGCQ00379169 - (Implemented) - Remove support for flashing firmware on PDs behind ALTA
SCGCQ00413064 - (Implemented) - Implementation of MegaSCU commands in storcli syntax
SCGCQ00413432 - (Closed) - Implementation of commands mentioned in the desc below
SCGCQ00441143 - (Implemented) - Implementing Bad block management related comands in storcli.
SCGCQ00369601 - (Implemented) - MWCLI. Add -adpbattest capability to EFI CLI
SCGCQ00369604 - (Implemented) - Rebuild time reset
SCGCQ00381311 - (Implemented) - dcmd path chagnes for supporting the new cachevault api
SCGCQ00419161 - (Implemented) - Implementation of StorCLIO command for ADPMFGSET -f file a0 in storcli
SCGCQ00419336 - (Implemented) - Implementation of setPcilinkspeed command in storCLIF
SCGCQ00423256 - (Closed) - RRB 45 - CLI Reporting of TMM VPD
SCGCQ00369742 - (Implemented) - MWCLI. R10, R50, R60, R00 VD creation
SCGCQ00381093 - (Implemented) - PR SCGCQ00319011: Rebuild time reset
SCGCQ00433703 - (Implemented) - Megacli/storcli support for lmrc driver
SCGCQ00434744 - (Implemented) - Equivalent storcli command implementation of MegaCLI -AdpGetPciInfo -aN|-a0,1,2|-aALL
SCGCQ00447069 - (Implemented) - Implementation of StorCLIO command for Adpnvram clear a0 in storclio as well as support legacy command
SCGCQ00413330 - (Port_Complete) - Storcli reports "segmentation fault" when running command to downgrade controller to iMR
SCGCQ00413856 - (Port_Complete) - remove the "Drive write cache" policy from Pd information.
SCGCQ00417917 - (Port_Complete) - UEFI StorCli doesn't show the correct UEFI Driver Version
SCGCQ00413017 - (Port_Complete) - Storcli reports "segmentation fault" when running command to downgrade controller to iMR
SCGCQ00413888 - (Port_Complete) - StorCli_6.0-The help file for "storcli /cx/dx set security " is missing
SCGCQ00376240 - (Port_Complete) - System halts on issuing storcli commands in EFI Environment.
SCGCQ00411384 - (Port_Complete) - Unable to start migration from R0 to R5
SCGCQ00411614 - (Port_Complete) - hits segmentation fault while creating multiple Vd's on Raid 10.
SCGCQ00413311 - (Port_Complete) - Cannot change or update controller date and time in MegaSCU
SCGCQ00437065 - (Port_Complete) - Driver Version is not shown
SCGCQ00375839 - (Active) - StorCLI: The legend for "phy Error Counters" exceeds the 80-char limit.
SCGCQ00411449 - (Port_Complete) - Improper output when configure R10 VD.
SCGCQ00414863 - (Port_Complete) - When a command fails, subsequent commands/actions are aborted in storcli (MegaCli)
SCGCQ00413041 - (Port_Complete) - Getting error message while installing or upgrading on Linux platform
SCGCQ00458499 - (Port_Complete) - Block configuration with unsupported strip element sizes
SCGCQ00414383 - (Port_Complete) - When a command fails, subsequent commands/actions are aborted in storcli (MegaCli)
SCGCQ00391744 - (Active) - StorCli-"show ctrlcount" help is not displaying.
SCGCQ00412593 - (Port_Complete) - Resolving compiler errors for Ctrl-R
SCGCQ00425263 - (Active) - storcli /c0 show all : did not have HA information+request to add additional info


Installation Commands: 
=======================
Refer to the User's Guide included in the package.





Component:
=========
SAS MegaRAID StorCLI
Release Date: 05/30/13


Version Numbers:	StorCLI
===============		===========			
Current Version		1.04.07
Previous Versoin	1.03.11


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
VMware MN
Solaris
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ00364332 - (Closed) - StoreCLI does not give proper message while trying to create 33rd VD on iMR FURY controller
SCGCQ00374336 - (Closed) - System halts on issuing storcli commands in EFI Environment.
SCGCQ00374732 - (Closed) - StorCLI cannot set "bypasserror" or "be"
SCGCQ00374733 - (Closed) - Storcli does not show 512 strip size in the online help
SCGCQ00378124 - (Closed) - Porting of AdpRestart Command
SCGCQ00372155 - (Closed) - Certain controller features displayed under "show all" exceeds 80-char limit.
SCGCQ00374118 - (Closed) - StorCli-"/c0/dall show all "in FreeSpaceDetails legend missing for "ID/VD/AfterVD"
SCGCQ00378135 - (Closed) - portings of AdpRestart command
SCGCQ00378828 - (Closed) - StorCLI-Legacy:'adpbootdrive get' fails to get bootdrive information.
SCGCQ00372264 - (Closed) - StorCLI: The legend for "phy Error Counters" exceeds the 80-char limit.
SCGCQ00374418 - (Closed) - Storcli : controller information query for OEM controller is displaying the status as failure.
SCGCQ00375757 - (Closed) - "StorCLI /cx/bbu show modes" show the bbu modes description without the actual bbu mode number
SCGCQ00374735 - (Closed) - StorCLI crashed when run on a Windows 2008 64-bit with 24GB of RAM and 66 drives attached
SCGCQ00380746 - (Closed) - Error handling for Drive FW download when the hardware is not supported.
SCGCQ00369258 - (Closed) - Description is shown as "None" when using verchk option while flashing fw.
SCGCQ00378448 - (Closed) - StorCLI reports incorrect message when download a firmware image to the controller with pinned cache
SCGCQ00375811 - (Implemented) - Need MegaSCU for changes in MFC
SCGCQ00380155 - (Implemented) - Undo - blocking firmware update for drives behind interposer
SCGCQ00379169 - (Implemented) - Remove support for flashing firmware on PDs behind interposer
SCGCQ00375839 - (Active) - StorCLI: The legend for "phy Error Counters" exceeds the 80-char limit.

Installation Commands: 
=======================
Refer to the User's Guide included in the package.





Component:
=========
SAS MegaRAID StorCLI
Release Date: 03/02/13


Version Numbers:	StorCLI
===============		===========			
Current Version		1.03.11
Previous Versoin	1.02.08


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
VMware MN
Solaris
FreeBSD
EFI 

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ00339670 - (Completed) - Fixing Linux Release 1.02-00
SCGCQ00359141 - (Completed) - Fixing Linux Release 1.03.01


Installation Commands: 
=======================
Refer to the User's Guide included in the package.






Component:
=========
SAS MegaRAID StorCLI
Release Date: 01/16/13


Version Numbers:	StorCLI
===============		===========			
Current Version		1.02.08 (Phase 3)
Previous Version	1.01.10 (Phase 2)


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
VMware MN
Solaris
FreeBSD
EFI (EFI StorCLI version 2.5.1.02.05)

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
There were few updates in command syntaxes. 
-	See revision history in Rev E : available in Page 2 of user guide(StorCLI_Phase3_RefMan_.pdf)
-	See revision history in appendix D: available in Page 76 of user guide(StorCLI_Phase3_RefMan_.pdf)
SCGCQ00295690	MWCLI. Solaris x86 support
SCGCQ00295810	MWCLI for uEFI
SCGCQ00314895	MWCLI. FreeBSD 7.x & 8.x support
Fixes since Phase 2 Release...
SCGCQ00374892	XD1.5-StorCLI attempts to Add/remove configure/unconfigured VDs when add/removal of ALL vds is issued.
SCGCQ00355952	StorCLI : Not able to set CC scheduling beyond some limit.
SCGCQ00356883	Storcli - legacy commands related to bbu failing in multicontroller environment
SCGCQ00345353	storcli /c0/ex show status---> It is not displaying all the information of the enclosure.
SCGCQ00356970	StorCLI: The time remaining column is not populated on executing "storcli /c0 show aso" and no description for "Mode" column.
SCGCQ00358752	StorCLI: "/c0 show" command displays PD LIST table information occupying more than 80 coloumns
SCGCQ00360027	StorCli-Incorrect VD size displayed after expansion of VD size.
SCGCQ00335385	Storcli command won't display any controllers
SCGCQ00339764	StorCLI_EFI : Getting syntax error for add hotsparedrive command.
SCGCQ00343802	StorCLI_EFI : System halts on performing  RLM (Raid level Migration)  without adding/removing drives, in EFI Environment
SCGCQ00352972	StorCli- system halted on executing command " storcli /c0/f show"  in UEFI
SCGCQ00354167	StorCli- "System hang" while creating the VD using legacy command in UEFI
SCGCQ00354581	Storcli_EFI : System halts while executing lengthy commands
SCGCQ00315799	4k_DIF: Not able to Replace the missing Drive for 4K VDusing the MegaCLI -Vogel_1.0_sprint_4k Apr 11, 2012
SCGCQ00315801	Creating the 4K VD fails with firmware error description using MegaCLI -Vogel_1.0_sprint_4k
SCGCQ00316591	Storcli: Importing Foreign Configuration while Rebuild is in progress Show fall shown multiple R60 VDs
SCGCQ00316673	Storcli: Query for Phyinfo using storecli twice, will results in non-functional controller/system hang
SCGCQ00316674	Unable to set abortCConerror property on controller card using StoreCli.
SCGCQ00316675	Storcli displaying Emergency spare is No for all unconfigured drives while "enableeug" property is ON
SCGCQ00337971	StorCLI : Not able to schedule PR in EFI environment
SCGCQ00338386	StorCLI : Not able to upgrade controller firmware  without using nosigchk and noverchk in EFI Environment.
SCGCQ00338398	StorCLI: getting syntax error for pd insert command in EFI Environment
SCGCQ00341481	StorCLI - after migration the last pd is getting displayed twice( when migrating from 4pd raid 5 to 6 pd r0 )
SCGCQ00341581	Set path to new library as "export LD_LIBRARY_PATH=/usr/local/lib" after installing libgcc-3.4.6-sol10-x86-local.pkg
SCGCQ00341585	fails to log the latest set of events to the file.
SCGCQ00341991	StorCLI_EFI: Displaying "?" symbol under progress bar when PD Initialization is in progress
SCGCQ00342017	StorCLI: After a controller FW flash from StorCLI, No pending Images are seen before a reboot as seen in the legacy builds.
SCGCQ00342072	FreeBSD - Adapter cache Flush is not working .
SCGCQ00342077	storecli_EFI.storecli.efi /c0/pall set linkspeed=val   It is not displaying PHY info field .
SCGCQ00342117	StorCli does not display a help message for  "/cx/ex show status h" and storCLI  storcli /cx/ex show all h
SCGCQ00342241	StorCLI_EFI:Storcli is showing that VD expansion is possible but not allowing to expand if space is before start LBA of VD
SCGCQ00342272	StorCLI_EFI : Not able to save the configuration with Megacli syntax
SCGCQ00342670	StorCli-"enblPI/PreventPIImport" equivalent command is not their in StorCLi
SCGCQ00342693	StorCLI: A Drive spinup/spindown not successful on drives marked as hotspare as against MSM.
SCGCQ00342730	Storcli_EFI : Not getting valid JSON output for any of the commands in EFI Environment
SCGCQ00342732	StorCLI: the "set bootdrive = on" command sets the requested vd2 as bootable without user intervention.
SCGCQ00343591	StorCLI: A dedicated hot spare cannot be assigned to any one of the particular spans for a spanned DG as against MSM.
SCGCQ00343636	StorCLI allows a single Unconfigured Drive to be assigned as a dedicated hotspare to two different VD's.
SCGCQ00343799	StorCLI: Cannot explicitly assign the configured cachecade VDs to the Disk Groups for the existing CC-VD.
SCGCQ00345525	StorCLI: On performing an "add vd" with size provided in TB a decimal value is truncated to whole number as input.
SCGCQ00345557	StorCLI:  A vd can be assigned to a cachecade VD multiple times also a cachecade VD allows to be assigned to itself.
SCGCQ00345791	Storcli: not able to flash PD firmware on FreeBSD
SCGCQ00346878	Storcli: Not getting proper import preview for secured foreign VD on EFI and Solaris Environment.
SCGCQ00346917	Storcli_EFI : Not able to set securitykey on controller in EFI environment
SCGCQ00348494	StorCli-" /c0 show stoponerror" is not working
SCGCQ00350582	StorCli- "Disk Group" column is missing.
SCGCQ00353580	Storcli- "/c0/fall show" is displaying wrong.
SCGCQ00353641	StorCLI - spinup/spindown is not supported for tape drive , but executing spindown operation shows success message
SCGCQ00356700	StorCLI - legacy command adpshutdown not working properly
SCGCQ00356986	StorCLI - when " stop initialization " command is executed on a pd even when it is not in progress it is showing success
SCGCQ00357024	StorCLI - flush|flushcache showing command not supported whereas subsequent legacy command working successfully
SCGCQ00360565	In '/cx/vx show all' Active Operations = None during a Rebuild
SCGCQ00289586	Emulated Block size should be displayed as part of PD information for 512E drives
SCGCQ00316676	StorCLI help does not have the information to show the boot drive
SCGCQ00316680	FreeBSD support for MegaWare Cli
SCGCQ00318116	StorCLI2.5: "delay" & properties of "Consistency Check" does not function properly
SCGCQ00320538	iMR_Inv_MegaCli:Deb package fir MegaCli not available for Ubuntu 12.04 OS
SCGCQ00324813	MegaCLI: MFI_STAT_NOT_FOUND returns when retrieving the FW event log.
SCGCQ00326760	StorCli adpbbucmd shows next learn cycle would happen 1 day earlier for SuperCaP
SCGCQ00327419	StorCli-IN help file-"BBU show status" command is not their.
SCGCQ00327557	Storcli-"BBU show help" is not working.
SCGCQ00328182	StorCLI2.0: patrolread help description for delay is mentioned in terms of "minutes" instead of "hours"
SCGCQ00328204	StorCLI- Individual help for VD expansion does not give the completion description .
SCGCQ00328568	StorCli-"PHY Linkspeed show help/" is not working
SCGCQ00329941	StorCli-"DRIVER VERSION" is not displaying for SWR controller  on LINUX Platform.
SCGCQ00330263	StorCli-" show  ds | safeid | rehostinfo help" is not displaying.
SCGCQ00330447	StorCli-" On VD show cc help " is not displaying
SCGCQ00335327	storcli 1.01.10 doesn't display all required enclosure info for /cx/ex show all, i.e. voltage/ps/temp/etc status/values
SCGCQ00337951	Storcli : Exit code is displayed  unnecessarily at the end of output on efi environment .
SCGCQ00337956	StorCLI: -h is not working for help display in  efi environment
SCGCQ00337967	StorCLI : getting invalid error code (out of range) while querying for invalid drive number in EFI Environment
SCGCQ00338155	StorCLI : VD's exluded from CC Scheduling is not reflected properly with /c0 show cc command in EFI Environment
SCGCQ00338194	StorCli-IN help file-"BBU show properties" command is not their.
SCGCQ00338206	StorCli- "legacy help file is not displaying"
SCGCQ00338265	StorCLI: paged view of any output should support " Press any key to continue" to proceed to next page
SCGCQ00338393	StorCLI : Date and Time of controller is not displayed in proper format in EFI Environment
SCGCQ00338576	StorCli-"Help page" last line execuite with storcli directory.
SCGCQ00339730	StorCLI_EFI : In paged output the lines following the message "Press any key to continue" should be displayed in next line.
SCGCQ00340208	code changes for some StorcliEFI-DEFECT
SCGCQ00341443	StorCLI - partial help for patrolread delay is not working
SCGCQ00341451	StorCLI - show patrolread is not showing the progress of the current patrol read in percentage
SCGCQ00341472	StorCLI - show migrate is not displaying the time since the virtual drive migration started
SCGCQ00341679	StorCLI : partial help for cc is not working ("/cx show cc h" ) . Giving syntax error
SCGCQ00342053	storecli_EFI>storecli h  It is displaying description of some commands(use only for partial help).
SCGCQ00342122	help file is not available for  "storcli dx show all h"
SCGCQ00342129	storecli_EFI> storecli.efi /c0/ex show status not displaying ALARM info field
SCGCQ00342144	StorCLI - the command "./storcli /c0 show reconrate " is displaying the migrate rate under controller prop
SCGCQ00342229	storecli_EFI> After stopping init in multiple vds ,VD status in not updating properly.
SCGCQ00342461	StorCLI doesn't show NCQ support of a SATA drive
SCGCQ00342597	StorCli-"Perfmode" value is not mentioned in the description
SCGCQ00342605	StorCLI does not prompt user intervention while deleting VD which has Boot Partition.
SCGCQ00342727	Help description for Controller Properties abbrevations like ABS, SOE is missing in cmd O/P
SCGCQ00342737	Not displaying the correct version of driver in megacli command.
SCGCQ00342997	StorCLI - not getting partial help for /cx/px set linkspeed h
SCGCQ00343108	StorCLI_EFI : Not able to disable/enable  Dimmer switch 1 with command /c2 set ds=off/on  type=4
SCGCQ00343191	StorCLI - cannot get a helpfile for "./storcli /cx set cc h "
SCGCQ00343199	StorCli-In Help File" show/set OCR" command is not their.
SCGCQ00343222	FREE BSD- Modifiaction of syntax required in help file for setting consistency check .
SCGCQ00343682	StorCLI - Syntax of set cc is given wrong in global help file
SCGCQ00343749	StorCLI: mismatch with help file for setting linkspeed with the that of the error message on setting unsupported linkspeed.
SCGCQ00343786	StorCLI -  "storcli /cx delete securitykey"when executed twice in a row shows a success status in controller properties
SCGCQ00344142	The size is in KB for "WithArrExp" instead of GB under EXPANSION INFORMATION
SCGCQ00344188	Help file not working for 'storcli /cx/vx expand '
SCGCQ00344707	StorCLI: 512KB Stripe size is not mentioned in CLI  help page of "storcli /cx add vd h"
SCGCQ00345311	StorCLI - "storcli /cx/pall set linkspeed = 1.5/3 ... " showing success but setting it individual is showing a comand invalid
SCGCQ00345706	./storcli /c0 set perfmode=val  ----->It is setting perfmode value other than 0 and 1
SCGCQ00345907	StorCli-" show aso " command is missing in help file.
SCGCQ00346025	./Storcli -AdpGetPciInfo -a0 ---->This command is not displaying information like bus,device,functional no. of the adapter.
SCGCQ00346919	Storcli_EFI : partial query for commands is not working with numbers like /c0 set h (works only with /cx )
SCGCQ00348538	StorCli-"Firmware Package Build" version is not showing in controller Info (UEFI)
SCGCQ00348706	StorCli-"/c0 set ds h" in help description need to some changes.
SCGCQ00349475	StorCLI: The "gas gauge" needs to be addressed under "show BBU status h"
SCGCQ00349498	StorCLI: A help file to be added for "storcli /c0/bbu start learn"
SCGCQ00351169	./storcli /c0 set securitykey=xxx passphrase=xxx ---->Description of securitykey should be display in description field.
SCGCQ00351987	Storcli : Unexpected line at output when legacy command ''Adpallinfo'' executed with page=x
SCGCQ00352560	The help file for "set backplane" needs to be revised.
SCGCQ00352571	StorCLI: "The set backplane = 0"  the command value description exceeds 80 charecters.
SCGCQ00352630	STORCLI: Command to set SOE(stop on Error) is missing in global help file
SCGCQ00352637	StorCLI: Global/Individual help missing for command to set ABS(Auto Boot Select) .
SCGCQ00352779	User guide PDF file for Technical and Documentation are required to be updated.
SCGCQ00352887	None of the build is having readme file except solaris in the storcli build ---->ver 1.02-02 Oct 23,2012
SCGCQ00353682	Storcli- Displaying incomplete foreign config even if all the drives are in Ugood state for /c0/fall show command
SCGCQ00353683	after controller firmware download completes Description is showing the firmware package version instead of firmware version
SCGCQ00354235	Storcli: StorCLI  should throw syntax error for the command /c0/dall show all all all
SCGCQ00354543	StorCLI: help legend missing for "show freespace"
SCGCQ00355107	StorCLI-Require Update of the URL mentioned in Readme File of SOLARIS11 .
SCGCQ00355116	Storcli_EFI : Showing success for  non-supported operations,  related with  association of VD to cachepool.
SCGCQ00355137	Storcli - when setting smartpollinterval to -1 , it is throwing syntax error instead of failure .
SCGCQ00355367	StorCLI- Description for what kind & range of value will be accepted by memscrubpatterns is not provided in help file
SCGCQ00355432	StorCLI : Not able to set CC execution delay if used with complete  CC scheduling command
SCGCQ00356657	Special Charecters are printed or the state info is missing under the state column of the drive.
SCGCQ00356695	StorCLI - when stop command for PD reated operations  is executed . The command description shows wrong slot id's for PD's
SCGCQ00356998	Storcli-display command when used with "page" is not showing the output correctly...
SCGCQ00357319	The "EID:Slot" is not populated on fetching information on the existing foreign configuration.
SCGCQ00357371	StorCLI: The PD list table is not sorted acoording to enclosureid:slotid.
SCGCQ00357647	storcli: cliefimain.cpp file changes for lengthy commands.
SCGCQ00357648	Storcli reports baterry is charging and discharging at the same time.
SCGCQ00359371	Storcli-"show" info need to add  abbreviation for "PDs/DGs/VDs/BBU/Y"
SCGCQ00361544	StorCli-"/c0 start pr " in failure state displaying worng 'error message'.
SCGCQ00364859	Correcting the formats of below commands (exit code ,show event log and time, date format )
SCGCQ00328185	StorCli-In legacy help file command line execute  along with" press any key to continue"-only Windows OS
SCGCQ00328531	StorCLI2.0: phy linkspeed help description is mentioned in terms of "GB" instead of "Gb/s"
SCGCQ00333006	LSI MegaCLI EncInfo (Enclosure Info) duplicates the first power supply status data to both power supplies
SCGCQ00338675	'VD ADD' should use 'strip' instead of 'stripe'.
SCGCQ00341595	StorCLI - Spelling mismatch "Alta" specified which should either be "SATA" or "ATA"
SCGCQ00342071	storcli help command with "Legacy" and "page" option doesnt display the paged help.
SCGCQ00342978	StorCli-"Phy linkspeed show all help" in description spelling mistake is their.
SCGCQ00343142	StorCli-"eccbucketleakrate" , the value should be greater than 0 and less than 65535. Help is misleading.
SCGCQ00344136	Description for option [expandarray] in command storcli /cx/v(x|all) expand Size=<xx> is not clear
SCGCQ00344150	StorCLI - partial help ( Descripton ) for command "storcli /cx /bbu show properties h " is not there
SCGCQ00344171	StorCli-"Smartpollinterval"value need to be mention in the Description.
SCGCQ00344800	Help legend is missing for properties of enclosure in O/P of ./storcli /c0/e59 show all and show cmds
SCGCQ00344994	StorCLI - "storcli /cx/vx show preservedcache " command is not present in the help file
SCGCQ00352071	Storcli_EFI : "storcli -h legacy" cmd is not working
SCGCQ00352881	Alignment text issue in the O/P of command "storcli.efi /c0 show eventlogInfo"
SCGCQ00359980	Code cleanup in Univ_viva_cli
SCGCQ00340241	StorCLI - " insert " command is not working
SCGCQ00338560	StorCLI : Driver version is not displayed correctly
SCGCQ00339757	StorCLI_EFI : Progress field for drive erase operation is displaying "?' symbol if drive erase is in progress.
SCGCQ00342762	StorCli-"Driver Version" field is missing (Free BSD 7.3)
SCGCQ00343005	StorCLI: Stripe Size of the VD is shown incorrect after a PD missing operation is performed on the disk group.
SCGCQ00346251	storcli does not report ROC temperature in '/cX show all' in HW section
SCGCQ00354427	StorCli-"System halts" on performing operation "/c0 set aso key=    " in UEFI
SCGCQ00342052	StorCLI - command "./storcli show " is throwing a description message that command is not supported
SCGCQ00343169	StorCli-"Show/set OCR help" is not Displaying
SCGCQ00344861	storecli_EFI > storecli.efi /c0 set perfmode h---> In  perfmode help file it is not giving what values we can set.
SCGCQ00346944	Storcli: Inquiry data of the drives is missing from output of  /cx/ex/sx show all command on FreeBSD with TB controller
SCGCQ00354191	Storcli - giving syntax error when trying to get help using numbers , e.g "storcli_efi /c0 h "
SCGCQ00355847	StorCli- "Serial Number" of physical Drives is not getting displayed in FreeBSD
SCGCQ00341986	StorCLI: Does not prompt the user to restart/reboot the controller after a FW flash for it to take effect as seen in MSM.
SCGCQ00348048	StorCLI: StorCLI does not provide single command to perform a locate drive configured as part of a VD as against MSM.
SCGCQ00348474	.\storCLI64.exe /c1 add vd type=r1 drives=47:1,2 ----> command is giving syntax error if using "comma" for vd creation.
SCGCQ00350579	StorCLI: The VD name cannot contain spaces as allowed in MSM.
SCGCQ00358917	EFI Shell StorCLI: Rebuild starts and does not make any progress in EFI env
SCGCQ00375019	StorCli64.exe /xd/wdall show command reports that NytroXD license is absent even when the license is available
SCGCQ00318433	Porting of Vogel 1.0 PRs to storcli phase 2.5
SCGCQ00341607	Failing to display Driver Version  in FreeBSd
SCGCQ00343664	Storcli-"Enclosure Slot No is mis matching "(DE1600-SAS )






Important Notes:
==================
STORCLI PHASE 2.0 Specific Limitations:
1.	User can use both 'raid0' and 'r0' for mentioning the raid level. And user can find both the forms in the help command.
2.	When passing parameter,'set' for CC mode is mandatory. 
3.	The use of comma in between array no and row parameter in the syntax for making pdreplacemissing should not be used.
4.	User would not be able to specify ROWs while creating Dedicated Hot Spare. Instead user needs to use Drive Group ID as dgs=N
5.	In Foreign Configuration show, utility will display VD as Foreign instead of showing the VD state.
6.	The success code and description is printed only after complete processing of the command. Success will not be printed unless the entire log is displayed to the output. Hence the success code and description is printed at the end of the log for this particular command.
7.	Any command syntax is still valid, if user uses - instead of /  for e.g. storcli.exe /c0-vall show.
8.	Show Bus and PCI Slot type are not shown as part of the controller information.
9.	While creating a VD using non-Enc-ID Devices, user needs to provide inputs in the format D:SlotID as syntax (for eg: Drives=D:1,2,3 where 1,2,3 are the slot ids of the non encID devices)
10.	Tape Drives will be listed only with /c0/sall show all command, /c0/sall show doesnt list Tape drive but only display the direct attached drives if present or a blank table if none are connected.
11.	Importing Foreign Configuration while Rebuild is in progress then query for Show fall the output would display multiple R60 VDs.
12.	Date and Time of controller is not displayed in proper format in EFI Environment 
13.	JSON is not required in EFI
14.	The sector size of the drives are displayed in KB instead of bytes under the PD List table. This is just display error in tabular format but it is displayed correctly in drive details.
15.	The Eid:slot column while importing a foreign config is not populated. StorCLI: The VD name cannot contain spaces as allowed in MSM.
16.	Consistency Check cannot be scheduled beyond year-2037AD.
17.	Flashing 9260CV low-level controller firmware is supported only through DOS version of CLI (MegaCLI) and not through EFI version of StorCLI.  Flashing MegaRAID firmware does not have this issue.

Known Behavior:
1.	All VD initialization command when run through StorCLI utility, shows the error message as failed for cachecaded VD. This is a generic limitation.
2.	While reconstruction is in progress, start of CC/Init/BGI operations on same VD throws an inappropriate error message. This is a generic limitation.
3.	In controller show cc the field CC current state will change only when it meets the schedule CC parameters.
4.	All the unsupported commands for SWR controller if tried to execute may result in unknown behavior for example  system hang-up. For the list of unsupported commands refer to user guide Appendix C: Unsupported Commands in Embedded RAID.
5.	Output for controller information contains junk characters in VMware ESXi 4.1 update2.  
6.	FDE drives are displayed as secured drives on SWR- SCU controller.
7.	There is no check to see whether user has entered different properties or the same property multiple times in StorCLI command. Hence StorCLI  does not throw syntax error for the command /c0/dall show all all all. This issue is because of the implementation of accepting multiple properties in a single command line in some cases.


Installation Commands: 
=======================
Refer to the User's Guide included in the package.




Component:
=========
SAS MegaRAID StorCLI
Release Date: 11/06/12


Version Numbers:	StorCLI
===============		===========			
Current Version		1.01.10


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
VMware MN

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
Initial Release


Important Notes:
==================
1.  User can use both raid0 and r0 for mentioning the raid level. And user can find both the forms in the help command.
2.  When passing parameter set' for CC mode is mandatory. 
3.  The use of comma in between array no and row parameter in the syntax for making pdreplacemissing should not be used.
4.  User would not be able to specify ROWs while creating Dedicated Hot Spare. Instead user needs to use Drive Group ID as dgs=N
5.  In Foreign Configuration show, utility will display VD as Foreign instead of showing the VD state.
6.  The success code and description is printed only after complete processing of the command. Success will not be printed unless the entire log is displayed to the output. The success code and description is printed at the end of the log for this particular command.
7.  Any command syntax is still valid, if user uses - instead of /  (e.g. storcli.exe /c0-vall show.)
8.  Show Bus and PCI Slot type are not shown as part of the controller information.
9.  While creating a VD using non-Enc-ID Devices, user needs to provide inputs in the format D:SlotID as syntax (e.g. Drives=D:1,2,3 where 1,2,3 are the slot ids of the non encID devices.)
10. Tape Drives will be listed only with /c0/sall show all command. /c0/sall show doesnt list Tape drive but only displays the direct attached drives if present or a blank table if none are connected.
11. Importing Foreign Configuration while Rebuild is in progress then query for Show fall the output would display multiple R60 VDs.
12. For any operation (Migrate/Init/BGI/CC) percentile completed in minutes is not displayed in StorCLI output. 
13. All VD initialization command when run through StorCLI utility, shows the error message as failed for cachecaded VD.
14. While reconstruction is in progress, start of CC/Init/BGI operations on same VD throws an inappropriate error message.
15. In controller show cc the field CC current state will change only when it meets the schedule CC parameters.
16. All the unsupported commands for SWR controller if tried to execute may result in unknown behavior for example  system hang-up. For the list of unsupported commands refer to user guide Appendix C: Unsupported Commands in Embedded RAID.
17. Output for controller information contains junk characters in VMware ESXi 4.1 update2.  
18. FDE drives are displayed as secured drives on SWR- SCU controller.



Installation Commands: 
=======================
Refer to the User's Guide included in the package.




